Printer Resetter Service Manual

Showing posts with label error. Show all posts

Wednesday, November 20, 2013

Reset waste ink pad counter overflow error for Epson L100 printer

Reset waste ink pad counter overflow error for Epson L100 printer

FIX PRINTER ERROR "parts inside printer end service life, waste ink pad counter overflow error"

Resetter of Epson L100 printer and How to Use it :

Reset tool of epson L100 can be downloaded at the following link Ziddu:
http://www.ziddu.com/download/21472253/epsonL100adjprog.zip.html (size 3.26 MB)
Password: www..com
Extract using unzip program.

steps:1
Turn on Epson L100 and make sure that Espon L100 printer is connect to the computer.
Then run Reset tool AdjProgcracked.exe, by double clicking the file "AdjProg cracked.exe"

Step:2
Click "accept" Next "Particular Adjustment Mode" Then Select "Waste ink pad counter reset"
Next click "Check" Then uncheck "play pad counters, FL Boxes counter, tube Ink Counter", then click the "initialization" Then "Finish".

Step:3
Turn off the Epson L100 printer, then disconnect the power of the printer.

Step:4
Reattach the power cord and turn on the printer, wait a while until Epson L100 ready.
Now Epson L100 is ready for use again.

Sunday, November 17, 2013

Reset Epson T50 and T60 Without Error 21000068

Get an error 21000068 when resetting your Epson T50 or T60 and not see any solution to prevent the problem. Why not try this tip. But this method not recommended for beginner user and you must understand what you are doing.

Here the reset method Epson T50 and T60 without error 21000068 :

Turn off printer and open printer.
Open your Epson main PCB board. You can view an 8 pin CMOS IC. That is Epson waste ink counter IC and found on all Epson Printer.
You can reset your printer without any resetter by following these ways.
Soldering pin no 1,2,3,4 by wire as show in PICTURE and now turn on printer for ”20 second”
After 20 second turn off printer and remove soldering wire from pin no. 1,2,3,4 ( back in original condition)
Now turn on your printer
And now your printer will be RESET

Note : This method is not recommended for beginners so you have to understand what you are doing. All problem caused by this tutorials is not our responsibility. Use this tutorial as your own risk.

Thursday, November 14, 2013

How To fix error code C0840001 on HP printers

How To fix error code C0840001 on HP printers

The error code C0840001 appears on HP printers like D1660, F2180... Sometimes, you can ear a grinding noise.

Procedure 1:

Turn printer off.

Open the door.

With a flashlite, look inside to the right side where is a small tray that slides forward and backwards.

Push the tray forward until it stops then move it backwards until the little black tab on the right is 1/2 inch from the metal part of the carriage.

Close the door.

Turn printer on.

Procedure 2:

Look for a spring and lever arm with some small gears. It is located to the left of the printer, near the guide rail.

Put a couple of drops of oil on the gears and lever pivot shaft.

Monday, October 21, 2013

Canon MP258 Printer Error Code

If you have a problem with canon printer you have, especially if there are problems with the following error code solutions. Here we would like to try to share to you about the error codes canon mp258 printer.

Error code on canon MP258 printer are:

E2-2 = No paper (ASF)
E3-3 = Paper hours
E4 = No ink
E5-5 = The ink cartridges are not installed or a non-supported ink cartridge is installed, or the ink cartridges are not installed properly
E8 = Waste ink absorber full, or platen waste ink absorber full
E9 = The connected digital camera / video camera does not support Camera Direct Printing
E14 = The Ink cartridges whose destination are wrong
E15 = Ink cartridge is not installed E16 – Ink remaining is unknown
E16-E19 = Failed to scan head alignment sheet
E22 = Carriage error
E23 = Paper feed error
E24 = Purge unit error
E25 = ASF (cam) sensor error
E26 = Internal temperature rise error
E27 = Waste ink absorber full or platen waste ink absorber full
E28 = Ink cartridge temperature rise error -
E29 = EEPROM error
E33 = Paper feed position error
E35 15 = USB Host VBUD overcurrent error – USB
E37 17 = Abnormal motor driver error
E40 20 = Other hardware error
E42 22 = Scanner error

Thursday, October 10, 2013

How to reset Canon MX318 printer Ink absorber is full Error Code 27 5B00

FIX PRINTER ERROR "parts inside printer end service life, waste ink pad counter overflow error"
If you encounter a problem or an error like "Ink absorber is full" or Error Code 27 or "Error Code 5B00". Its mean that the Printer Counter Protection is Full and it required a reset and Ink wastepad replacement, if you want your printer to work again. There are two ways to reset the Canon MP (all in one) printer, One is by using a Software tool and the other is manually resetting the EEPROM of the printer. Below is the step by step procedure on how to reset your Canon MP (All in One) printer.

Please follow the step by step procedure to reset your Canon Pixma MX318 Printer

Turn off the Printers.
Press and Hold the "Stop/Reset" button then press POWER button.
Release the "Stop/Reset" button while keeping POWER button on press.
Press "Stop/Reset" 2 times and then release all the buttons.
Note: If the above was properly performed the printer will enter the "Service Mode".
Press the "Stop/Reset" button 4 times, this will select the clear waste ink counter function. The lamp will alternate (change) color with each key press.
Mode:
1. Service/Factory test printout, including ink sensor check.
2. EEPROM - Info printout.
3. EEPROM - Initialization.
4. Reset the Waste ink counter.
After selecting the desired mode (eg 4), press the POWER button to "set" the change, and return to the top of the function selection menu. Press the POWER button again to restart the printer. Or unplug the printer to turn off.
On the Canon Pixma MX318 Printers, And your done!

Warning: Getting rid of the error message won’t change that you might end up with ink leaking out of the printer if you don’t either replace or clean the ink wastepad.