Printer Resetter Service Manual

Wednesday, November 27, 2013

HP Laserjet 5 series service mode

1. Hold down the Menu+ and Value+ keys while powering on the printer. Hold the keys down until SERVICE MODE is displayed.
2. The interrupted power-on self test is resumed. If the test completes successfully, the message SERVICE MODE is displayed.
3. To exit service mode, press the Go button.

Tuesday, November 26, 2013

How to reset the protection counter of Epson Stylus R7880

Epson Stylus Pro R7880 Adjustment Program

FIX PRINTER ERROR "parts inside printer end service life, waste ink pad counter overflow error"

Please follow the steps below to reset the protection counter effectively.

Double click AdjProg.exe.
Click “Accept” button.
Click "Select" button. and select your printer model then click "OK"
Click “Particular adjustment mode” button.
Select on “Waste ink pad counter” and click “OK” button.
Click on “Initialization” button and the program will reset the protection counter.
Turn off the printer as a program instructed then turn on again.
Click “Finish” button. and its done!

Warning: You might end up with ink leaking out of the printer if you dont either replace the waste ink pad or install external waste bin.

Download

Monday, November 25, 2013

Resetting Instructions for Epson Printers by Using Adjustment Program

This procedure is applicable for all Epson printers. In fact there are two models/versions software resetters or adjustment program for Epson printer (see the picture). Some adjustment program requires date setting to run the software without error and other not require.

Model 1 of Epson adjustment program(tab version)

Switch on the printer.
Set computer date setting (if the adjustment programs require date setting).
Run the adjustment program.
Set printer model then click ok (if exist, usually there are adjustment program can be used at more than one printer).
Click Maintenance Tab
Check Protection counter.
Click protection counter to reset counter to zero.
Then click Ok, Ok
switch off printer for 5secs then switch on again
done

Model 2 of Epson adjustment program (menu section)

Switch on printer.
Set computer date setting (if the adjustment programs require date setting).
Run the adjustment program.
Set printer model then click ok (if exist, usually there are adjustment program can be used at more than one printer).
Click particular adjustment mode.
Select waste ink pad counter in the maintenance section then click ok or double click the menu.
Click on “check button” or “read button” till its done then click on “initialization button” then click “finish”.
switch off printer for 5secs then switch on again
done

If you see error when running the adjustment program please read this article.