Printer Resetter Service Manual

The following manual is organized into some sections as the following : general information, engine mechanical and lubrication system, hybrid, transmission and driveline, suspension, brake system, steering system, restraints, ventilation heater and air conditioner, body interior, body exterior, driver controls, electrical and power control, driver information and multimedia, cruise control, and the maintenance. download

To print a configuration page from a Ricoh MP C305SP or C305SPF printer:

- Press the User Tools/Counter button.
- On the screen, select Printer Features.
- Select List / Test Print.
- Select Configuration Page.

To reset counter Canon PIXMA iX4000 or iX5000 you have to enter to service mode. Procedure to enter to service mode on Canon PIXMA iX4000 or iX5000 is as following :

1. Connect the Canon PIXMA iX5000 or iX4000 printer to the power cord. ( note : If the automatic power-on function is enabled in the printer, the printer enters the service mode for the first time, but it will never enter the service mode if the printer is turned off by the Power button. This is because the printer remains to be turned on internally if the power is turned off by the Power button. To prevent this, disconnection of the power cord is required before starting the printer in the service mode ) .
2. With the Canon PIXMA iX5000 or iX4000 printer powered off, while pressing the Resume/Cancel button, press and hold the Power button. (note : Don’t release the buttons. The Power LED lights in green to indicate that a function is selectable.)
3. While holding the Power button, release Resume/Cancel button. (Don’t release the Power button.)
4. While holding the Power button, press Resume/Cancel button 2 times, and then release both the Power and Resume/Cancel buttons.
5. When the Power LED lights in green, press the Resume/Cancel button 4 times to reset waste ink counter in the Canon Pixma iX5000 / iX4000. (note : If the Power LED does not light in green the printer does not enter the service mode, disconnect the power cord and plug it again. Then start from step 1 to start the printer in the service mode again).
6. At the end of the service mode, press the Power button. The paper lifting plate of the sheet feed unit will be raised.
   

Note :

• Each time the Resume/Cancel button is pressed, the Alarm and Power LEDs light alternately, Alarm in orange and Power in green, starting with Alarm LED.