Friday, October 25, 2013
Browse »
home»
canon
»
Error Code Canon MP150/MP160 and How to clear E27 Code MP150/MP160
Error Code Canon MP150/MP160
E9 The connected digital camera / video camera does not support Camera
Direct Printing
E14 The Ink cartridges whose destination are wrong
E15 Ink cartridge is not installed E16 - Ink remaining is unknown
E16 -E19 Failed to scan head alignment sheet
E22 Carriage error
E23 Paper feed error
E24 Purge unit error
E25 ASF(cam) sensor error
E26 Internal temperature rise error
E27 Waste ink absorber full or platen waste ink absorber full
E28 Ink cartridge temperature rise error -
E29 EEPRsaya error
E33 Paper feed position error
E35 15 USB Host VBUD overcurrent error - USB
E37 17 Abnormal motor driver error
E40 20 Other hardware error
E42 22 Scanner error
How to clear E27 Code
Error Code Canon MP150/MP160 and How to clear E27 Code MP150/MP160
E9 The connected digital camera / video camera does not support Camera
Direct Printing
E14 The Ink cartridges whose destination are wrong
E15 Ink cartridge is not installed E16 - Ink remaining is unknown
E16 -E19 Failed to scan head alignment sheet
E22 Carriage error
E23 Paper feed error
E24 Purge unit error
E25 ASF(cam) sensor error
E26 Internal temperature rise error
E27 Waste ink absorber full or platen waste ink absorber full
E28 Ink cartridge temperature rise error -
E29 EEPRsaya error
E33 Paper feed position error
E35 15 USB Host VBUD overcurrent error - USB
E37 17 Abnormal motor driver error
E40 20 Other hardware error
E42 22 Scanner error
How to clear E27 Code
- With
the printer powered off but connected to a power source, press the
Power button while pressing and holding the Stop/ Reset button. - When the Power is lit, press the Stop/Reset button two times while pressing and holding the Power button.
- When
releasing the Power button and the Stop / Reset button (regardless of
order), the printer will move into a service mode. (Waiting for menu
selection) - When the on/off lights in green, press the Stop/Reset
button the specified number of time(s) according to the function listed
in the table below.(Each time the Stop/Reset button is pressed, the LED
lights alternately in orange and green, starting with orange.)note:
press 4 times for waste ink counter reset.
The number of the Reset button pressing LED Function Remarks
0 time Green Power off
1 time Orange Service pattern print (auto teste)
2 times Green EEPRsaya print (dados da EEPRsaya)
3 times Orange EEPRsaya reset (EEPRsaya reset)
4 times Green Waste ink counter reset (Absorvente reset)
- Turn off the printer.( it must be turn off) then turn it on again.
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment